|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SUBMINIATURE SOLID STATE LAMP AM2520SURCK08 HYPER RED Features SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. YOKE LEAD. LONG LIFE - SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS / REEL. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1267 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/05/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1202000702 Selection Guide Iv (mcd) @ 20 mA Min. AM2520SURCK08 HYPER RED (InGaAlP) WATER CLEAR 180 Typ. 650 Viewing Angle 21/2 20 Part No. Dice Lens Type Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 650 635 28 35 1.95 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1267 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/05/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1202000702 Hyper Red AM2520SURCK08 SPEC NO: DSAD1267 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/05/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1202000702 AM2520SURCK08 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength),the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1267 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/05/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1202000702 |
Price & Availability of AM2520SURCK08 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |